A Golden Retriever looks best when they move with their shiny coat fluttering in the wind and shining light brightly back at you – or at least, when well-groomed. Fortunately, grooming a Golden Retriever does not have to be impossible, With some simple tools and 20-30 minutes of brushing each week, your golden retriever grooming will be done and furry friend will look stunning.
For most of the year, Golden Retrievers are “wash and wear,” they are less grooming required compared to many breeds. However, this does not imply it is not necessary to groom them. Regular brushing and combing of the coat a few times a week and a bath as necessary keep shedding to a minimum and the occurrence of mats and tangles at bay.
Moreover, regular grooming is not just important to maintain appearance. A dirty, matted coat isn’t much to look at, but it’s also not comfortable for your pet to wear. MATS are uncomfortable to wear and can create sore developing sores and irritative skin. If you know how to groom a Golden Retriever in principle and your companion has mats or tangles in his coat, it would also be best to get your pet properly groomed with mats and tangles removed professionally, and then, after that, start to groom your dog yourself.
The basic supplies for you Golden Retriever grooming include:
Choose a brush and comb. Ideally, you would have a good quality slicker with smooth bristles and a comb with nicely finished teeth. Inferior slickers can have bristles that are not smooth and can scrape the skin and damage the hair. Have treats times to treat your dog whtie brushing and combing.
Golden Retrievers, regardless of their color variation, have a double coat that includes a thick undercoat with tracks of short hair underneath an outer layer of longer hair. This aspect causes eagerness to share, especially in the double period. Golden Retrievers need regular grooming to maintain the hair’s health and appearance.
Select the work area you want to use. Many people want to leave their grooming tools near their television chair or brush their dog while watching their favorite shows. Others prefer to clean their pet in the bathroom, laundry room, or other non-tile or non-carpeted area so they can be easily wiped.
Start by spraying the area you wish to work on first with a quality coat spray. This is prefereable since it mitigates static and allows the brush to move through the coat relatively easily. Quality coat spray will allow you to work through tangles and smooth the coat while leaving a great feel and smell.
You should start working in designed areas, the left and right hindquarters, the midsection, the chest and front legs, the head, and the torso to secure that address each end of the dog. Often, You should spray the left hind leg, and with a slicker brush, You should address all from the spine down, particularly concentrating on the smooth, long hair on the back of the thigh. Spray gently, then, using the slicker brush, spray a layer from the skin to the tip, eliminating the dead cover and lesser tangles as you move.
One should “pat and pull” when they are using a slicker brush. Pat the brush into the coat, then pull it from the base of the hair outward. Continue this until you have finished that section. For the very soft spur behind the ears; any area where there is friction, such as under a collar or harness, where the legs join the body; the long feathers on the front legs; the “pantaloons” on the back of the rear legs; and the thick plume of the tail, use a comb.
After you have sprayed, brushed, and slickered that whole area, follow up with the comb. The comb serves two purposes for you: first, any further loose dead hair you may have missed with the slicker is removed, and second, it points up the slicker’s work. If you brush a section and then can’t easily pull a comb through it, go back over that section with your spray and slicker and then recheck it with the comb. When the comb pulls through smoothly from skin to hair tip, you’ve finished with that area and can move on to a virgin section. This process may take an hour or two the first few times if your pet’s coat has deteriorated to this state, but after you have everything slickered and combed there should be no further tangles to go through, and only a thirty-minute investment no less than a week should keep a Golden Retriever’s coat well-maintained.
If the coat of your Golden Retriever seems to smell or feel soiled, you can bathe it. Use a decent, basic cleansing pet shampoo or Conditioner. Start by completely soaking your dog with lukewarm-to-cool water, all the way down to the skin, and then use a dampened plain kitchen sponge to apply the shampoo. Be particularly mindful of longer-furred regions, paw pads, and their potty areas.
Usually, it is better to give a small rinse, add another dose of shampoo, and work it in well then. The water should be warm enough to bathe a baby and ensure to rinse every bit of shampoo from the coat. After you have finished, repeat the rinse to guarantee it is all taken out. If left behind, shampoo can be a skin irritant and dirt magnet.
At this point, you need to remove as much moisture from the coat as possible, using a bath towel or a towel made of a material like absorbent towels for drying pets, such as the Dog Gone Smart Dirty Dog Shammy Towel. Don’t forget to try to dry the pet’s ears to avoid inflammation. Or instead, use ear cleaning liquid to clean your ears.
Finally, you can use a hair dryer set to low or cool setting and kept at least 6 inches away from the coat to finish up, or allow your dog to air dry in a warm place. Brush and comb the coat once it dries, and you are ready to show off your friend’s gleaming, flowing coat.
Trimming your pet’s claws ? In that situation, doing it in the tub is ideal. In the tub, many dogs remain relax when they are getting their claws clipped. For larger prickly claws, pick a nail trimmer like Millers Forge Nail Clipper. In case you observe the quick, or the live area within the nail containing a blood vessel, cut just above it and cut off the nail’s tip.
If you can’t easily see the quick—like if your dog has very dark or black nails—use another method: look at the claw’s underside. The dead section on the underside, just before the claw starts to curve beneath, will be a hollow, looking like a canoe right side up. You can clip this hollow section without worry. If you trim too close, and a drop of blood appears; just apply a styptic powder , like Remedy+Recovery Styptic Powder to the affected area to stop the bleeding.
If you feel comfortable doing so, the ears are also good to clean after the bath. It will eliminate all the accidently driven bathwater and make your pet’s ears smell fresh. Just squeeze a few drops of cleaner into the ear and gently massage the sides under the ear to work the product into the canal. Your dog will want to shake their head and body after this, so get prepared with a towel! Golden Retriever grooming is not rocket science: make a routine of it and keep a steady eye on it. Little actions go a long way to ensure your best furry friend looks and feels excellent.
